The issue with building defects and how to solve it

Building defects are very common in a building project, and it gets worse due to bad site management and unstrict site supervision. Besides the big effects of the cost overrun and project delay shortcomings, there is third secret element to the construction managers and engineers that is the responsibility and difficulty of handling such defects. An unexpected defect will cause the entire site extra workload over it until it has been completely remedied. PlanRadar, the app for building defect management, conducted a survey of 160 users in early 2019 and the findings revealed the following: Sander van de Rijdt, PlanRadar’s managing director and co-founder said “Most of our users spend between one and five hours a week working on the construction defects. About one in four missed between six and ten hours, and one in ten put in the extra effort even more than ten hours a week by handling construction defects.” Half of the respondents predicted that digital monitoring and recording construction defects could save up to five hours a week, and around one in five saw as much as possible time savings of six hours or more. Innovative software monitoring of defects as PlanRadar allows a major improvement in the construction industry by providing a simplified method for tracking and documenting each building defect until it is complete. It’s not true anymore where you see a defect on site and fail to report it and then remember it back at delivery of the product. The ticketing tool used saves time and, in an integrated enhanced methodology, increases on-site efficiency. In this post, we will provide you with the key insights you need to know about the building defects. What are the main styles, causes and aftermath?

What Defects of Most Common Construction

Building defect is broadly divided into two categories, structural and non-structural cases. Second, any flaw in an external component that has a detrimental impact on other parts of the building and affects the protection of the facility is the structural defect. They can be caused by factors such as structural, mechanical, electrical or environmental. In addition to the design defect which is also known as a structural defect because it affects the building’s performance. The most significant deficiencies, according to PlanRadar study, exist primarily in fire safety and preparation. The project participants consider about one in three fire safety faults and around one in five in the planning process to be relevant. Faults are frequently serious on the faced ( 20 percent ), the roof ( 16 percent ), the windows/glazing (15 percent ) and the drywall and shell ( 14 percent each ).

“Planner and contractors’ good order situation is gradually leading to chaotic and hasty work,” critices Domagoj Dolinsek, PlanRadar’s managing director and co-founder. “The occurrence of the defects tells little about their importance. In particular, trades that, if in doubt, trigger life and limb hazards in case of doubt, such as electric or fire safety, must provide technical and qualitatively perfect results, even under pressure of time and expense.”

Second, non-structural faults, they are any fault occurring within the building that does not affect other parts of the facility and does not cause any damage. Such flaws occur in brickwork, plaster works or paint dampness. Both structural or non-structural, any defect in the property has a negative impact on the performance of the building’s roles, know the reasons why the antidote was discovered.

Getting a Building Defect in Your Project What Are The Reasons And Consequences ?

Building defects sometimes occur due to different causes, but it is best to know the source, because prevention is better than cure. If you know where the leakage is the this breach can be easily sealed. Some construction defects occur due to improper design or lack of materials, or even bad workmanship. According to UKessays here are the most popular 35 causes of construction defect.

  • Lack of inspection
  • Making use of inexperienced, unqualified inspectors
  • Avoiding and ignoring inspection completely
  • Non implementation of corrective actions during the construction process
  • Inaccurate measurement
  • Making use of defective or damaged formwork
  • Excavations to close to an existing building and exposing the foundations
  • Non-conformance with waterproofing specifications
  • Inability to read and understand/interpret drawings
  • Insufficient concrete cover
  • Improper construction of cold joints
  • Loss in adhesion between materials

If it was too late to avoid the defects and you fall into one of them, you will certainly suffer one or more of the repercussions of the defect. The key effects or repeated faults at work are cost overrun, project completion failure, disgruntled customer and bad image. According to survey, the extra costs arising from the occurrence and repair of construction defects contribute to at least 2 percent of the construction costs for each fifth project member. One in five position them at 1-2 per cent of the building volume as well. When we talk about meg-million ventures it is not a trivial figure. find the way to produce the best performance and the smallest shortcomings.

Spread the love

You may also like...